You can spray lacquer with HVLP like your spray finish (light coats) on dry wood that has been finish-sanded for a minimum of 220 grit. HVLP sprayers are better than the conventional spray guns as they’ll reduce the overspray and bounce-back.
But an airless sprayer with appropriate tips can be used in spraying thick liquids such as latex house paint or thin liquids including varnish, lacquer, and stains for your playsets, woodwork, cabinets, and doors.
Thus, if you’re refinishing old lacquer or getting that vintage color on your new woodwork pieces, the lacquer delivered with an HVLP spray gun will produce that subtle texture and tactile sense.
s: 7 Best HVLP Spray Gun for Lacquer in 2021
Fuji-2203G Semi-PRO-2 is a classic turbine sprayer for home DIYers or professionals – offers great versatility for lacquer painting.
The sprayer generates a smooth finish that’ll work on most finishes, including nitrocellulose lacquer or shellac. It’ll give you that soft and clean final touch to complete that project pass.
The sprayer is comfortable transporting or moving around thanks to its 25-foot hose – you’ll quickly go on painting for long until all the cups are dry. Readily handles sealer or lacquer.
The sprayer has an air cap (1.3mm) pre-installed and comes with many setup tools. The sprayer’s HVLP gravity-fed system will work well for garage hobbyists and home improvement.
The long 25-foot hose offers excellent accessibility, but these sprayers won’t be used for exterior home painting. With the long hose, you won’t require to move the sprayer around like in deck finishing.
Fuji-2203G Semi-PRO-2 provides adjustability (incremental 1″ – 12″) on the operation as you can use various spray patterns, including circularly, horizontally, and vertically.
The HVLP sprayer is equally simple to clean for most people. – and hence it’ll also last longer. You can readily break down the sprayer in a short time – and thus clean the parts fast.
Graco-Magnum 257025 offers great pressure adjustability, and hence great paint flows control thanks to the appropriate Switch Tip (RAC IV). You can reverse the tip if there is paint clogging.
The sprayer provides the capacity to use unthinned spray paint even with high pressure. This is possible due to the suitable tip sizes ranging from 0.009 inches, 0.011 inches, 0.013 inches, and 0.015 inches.
The Graco-Magnum 257025 (110 volts) paint, and lacquer sprayer is created to work well for your large-scale projects. Such as painting your ceiling.
With the massive gun, it’s possible to have about 5 gallons of the lacquer as every time – and hence you’ll comfortably work on different large-scale projects without requiring regular sprayer refill.
Further, for additional flexibility, the sprayer’s design allows one to spray from a bucket that’s 1 or 5 gallons thanks to its suction tube that’s very flexible.
The sprayer’s 50 ft. painting hose allows you to get to the hard-to-reach locations – and thus, you can get to the second story using a ladder or even peaks with excellent performance.
Besides, the device is easy and fast to clean as you can connect the PowerFlush Adapter to your garden hose. You can use the sprayer to paint about 50 gallons of lacquer annually.
The additional compartment gives extra storage for the power cord, spray tips, and cabinet spray gun. It draws lacquer via pressure and submersion – no need for regular hoop cleaning and filling.
Wagner-0529021 FLEXiO-890 is a high-volume but also low-cost sprayer for an effective finishing. I recommend it for painting trim, cabinets, ceilings, walls, and furniture.
Wagner-0529021 FLEXiO-890 pins its weight down, and thus it’ll cut the hand fatigue as its turbine is grounded. You can deliver the unthinned coatings thanks to the air-power.
The device offers easy and straightforward clean-up. Also, there is portable storage – you can store the sprayer’s two nozzles and hose in its turbine base.
You may control (decrease or increase) the lacquer flow. The Detail Finish Nozzle plus the spray nozzle helps you match different project sizes (small or large).
It allows round, vertical, and horizontal spraying. It’ll give you a relatively polished and smooth finish with a limited amount of splatter.
Wagner-Spraytech 0518080 is simple for your finishing work, including smaller or larger projects like decking, redwood fences, trim, cabinetry, and doors.
Wagner-Spraytech 0518080 gives a professional and smooth finish for your more refined projects. It also comes with a user manual, 20-foot hose, plastic lacquer (1.5-quart) container.
The professional painters or DIYers love the sprayer due to its 10 pounds stationary base. The electric sprayer is corded and hence enables easy recharging.
Besides taking care of the sprayer weight, Wagner-Spraytech 0518080 comes with the 20-Foot Flexible Hose, and hence you won’t have to move the device regularly.
The device allows easy maintenance and cleaning if the machine gets dirty and down – making you have less cleaning time without compromising on the components.
Ingersoll-Rand 210G is a proficient spray gun that’s loved by many homeowners and professionals. It’ll give you some flawless finishes, and it’s easy-to-use.
Ingersoll-Rand 210G comes with many features such as a durable tube made from stainless steel, pattern control (at its back), and its precise fan.
It’s possible to quickly adjust the paint’s pattern and flow to allow you to work on various projects and areas – with their viscosity and matching sizes of caps.
Ingersoll-Rand 210G allows one to work well with different finishes like stain, lacquer, and spray paint. The adjustments knobs help set the spray and fluid pattern – for ease and precision.
The suspension hook and non-drip cup make it easy to spray your surfaces – by making no mess, and it won’t drip – this saves you headaches and time.
The adjustable pattern size comes thanks to the no-bleed gun – it’s easy to disassemble and clean thanks to its ergonomic handle. You have a 1 – 12 inches adjustability on the oval pattern.
You can use the bottom-feed cup to replace the gravity feed cup – plus the durable device on its parts includes needle, nozzle, and paint holder.
You can get different air-pressure control and versatility when you switch between the bottom-feed gun to the gravity feed. Thus, you'll get the pros of the lacquer sprayer (high-pressure) cheaply.